|
INPUT |
|
Connections |
XLR or RCA |
|
Balanced input Impedance |
94 kΩ |
|
Unbalanced input Impedance |
47 kΩ |
|
Maximum Input Level (input Bal) |
2 Vrms |
|
Maximum Input Level (input Unbal) |
1 Vrms |
|
Grounding
Two possible modes selectable by a switch on the rear panel) |
Grounded : Signal ground connected to earth
Lifted : Separated ground and earth signal |
|
OUTPUT |
|
Power RMS |
200W @ 8Ohm |
|
Power Pic |
850W (max 56.7Vpic 15Apic) |
|
Frequency range (+0dB, -0.1dB) |
5Hz to 24kHz |
|
Frequency range (-3dB) |
0.7Hz to 85kHz |
|
THD+N @ 200W per channel on 8Ohm from 22Hz to 22kHz |
< 0.004% @ 1kHz |
|
THD+N unloaded |
< 0.001% @ 1kHz |
|
Clip to Noise Ratio (input Bal) |
-114dB |
|
Clip to Noise Ratio (input Unbal) |
-112dB |
|
Gain unbalanced |
32dB |
|
Gain Balanced |
26dB |
|
Output impedance |
0.0 Ohm |
|
Damping Factor |
> 3000 |
|
TECHNILOGY USED |
|
Unique bias circuit guarantees a constant high bias current in all situations |
|
Real dual mono topology with 6 High resolution MOSFET for a total of 48 Amp. |
|
Three toroidal transformers, one per audio channel of 880VA each and one for digital. |
|
POWER |
|
Nominal line voltage |
115 or 230 V |
|
Input voltage range |
+/-15 % |
|
Maximum power consumption |
805W |
|
Standby consumption |
Less than 1W |
|
SIZE & WEIGHT |
|
Height |
148mm |
|
Depth |
440mm |
|
Width |
440mm |
|
Weight |
30kg |
|
SAFETY FEATURES |
|
- Non-invasive protection of the audio signal against overload at a current of more than 9 Apic (equivalent to 320W power at 4Ohm) |
|
- Non-invasive protection on the audio signal against DC components on the audio
outputs for all frequencies below 5Hz |
|
- Automatic switching to MUTING if the AC line drops or is interrupted. |
