|
INPUT
Connections XLR or RCA
Balanced input Impedance 94kΩ
Unbalanced input Impedance 47kΩ
Balanced input sensitivity 2.525Vrms
Unbalanced input sensitivity 1.162Vrms
Grounding (switch on the rear panel Grounded : Signal ground is connected to earth
selection) Lifted:Signal ground is decoupled from earth
OUTPUT
Nominal audio power 800Wrms@4Ohm
Continuous peak power 2200Wpic (max80.8Vpic28Apic)
Instantaneous power peak (<200ms) 3600Wpic (max80.8Vpic45Apic)
Frequency range (+0dB, -0.1dB) 5Hz to 90kHz
Frequency range (-3dB) 0.7Hz to 165kHz
THD+N @ 800W per chanel on 4Ohm <0.0018%@1kHz(-95dB)@22Hzto40kHz
THD+N unloaded <0.0007%@1kHz(-103dB)
Clip to Noise Ratio (input Bal) -123dB
Clip to Noise Ratio (input Unbal) -123dB
Gain Unbalanced 33.1dB(45.28V/V)
Gain Balanced 27.1dB(22.64V/V)
Output impedance 0.0072Ohm
Damping Factor @ 8 Ohm 1100
TECHNILOGY USED
- Unique bias circuit guarantees temperature-compensated bias current
- Real dual mono topologies with 12 High resolution MOSFETs for a total of 96 A peak-to-
peak
- Oversized power supply circuit, capacitive decoupling of mains voltage to eliminate
interference.
- DC free output.
POWER
Nominal line voltage 115 or 230V
Input voltage range ±15%
Nominal power consumption 1200W
Standby consumption Less than 1W
SIZE & WEIGHT
Height 271mm
Depth 440mm
Width 440mm
Weight 56kg
SAFETY FEATURES
- Guaranteed power output without any parasitic DC components
- Output voltage monitoring circuit to protect the loudspeakers if too low a frequency is
applied to the input.
- Output current limited to +-45A peak
- Overcurrent protection: cuts the power output if a current of 20 Arms or more (1600W at 4
Ohm) remains for more than 200 ms
MSRP 64,500 EURO
|
