기존의 GigaWatt사의 베스트셀러 제품인 PF-1의 Economic 버젼입니다..
PF-1과 거의 유사한 구조로 만들어졌으며 소켓과 디스트리뷰션바등을 다른소재를 사용해서 만들어진 제품입니다..
이제품은 기본적으로 파워코드가 포함되어 있지않으며
GigaWatt사의 엔트리 제품이지만 만듬새나 내부소자 소리성향 모두 가성비를 훌쩍뛰어넘는 잘만들어진 멀티탭입니다....

Gigawatt PF-1e 멀티탭의 특징

•돋보이는 탄탄한 외관 설계(표면 EMI 차폐코팅제)
•Gigawatt 상급 모델에서 사용된 전기분배 솔루션을 그대로 적용
•극저온의 효과와 영속성을 그대로 PF-1e에 적용(Gigawatt의 극저온처리기술)
•탁월한 전기공급으로 다이내믹스와 악기의 색채감이 저하되는 현상을 방지

The PF-1e is a simplified, economical version of the PF-1 MK2 power strip. Keeping a similar architecture of the main filter allowed for the same level of protection to the connected devices, while savings in used components lowered its price significantly. Nevertheless the PF-1e is a brilliant device, which will prove itself in each – even very advanced audio-video system.

Designing the PF-1e we resigned from the most expensive components. This does not mean, that we used lower quality items or lowered the level of guaranteed safety. The architecture of the main anti-interference filter and the overvoltage protection remained unchanged compared to the PF-1 EVO strip. Interference is blocked by a RLC filter block. It was built around high quality metalized polyester capacitors with low inductance and an IP (Iron Powder) filtering core. All elements of the filter are mounted using silver solder on a massive PCB with large cross-section traces.

In the power strip we resigned from using traditional protective elements like cartridge or thermal fuses, which have a detrimental influence on the sound as they throttle the current flowing to the protected device. The overvoltage protection of the power strip is based on a cascade of protective elements like plasma spark gaps and new generation of UltraMOV varistors. Working together with a properly made in-wall electrical grid, this setup guarantees a complete protection against overvoltage and overcurrent.

The massive chassis of the power strip is made completely out of metal. It constitutes also a perfectly sealed shield protecting from RFI and EMI interference. In the PF-1e we resigned from the signal LED and the distribution rails. The internal cabling is made from copper conductors with 2.5 QMM diameter. There are six Schuko output sockets. The PF-1e is also available with NEMA 5-20R sockets, used in United States and some Asian countries, as well as Australian type sockets AS/NZS 3112.

The PF-1e has an IEC input socket, which accepts all kinds of power cords. The strip is available in two versions: without cable and with a 1.5m power cord. To maximize the potential of the PF-1e we recommend the usage of the power cable PowerSync or PowerSync PLUS

All GigaWatt products are covered by an insurance policy for the connected equipment, with a total insurance value of 1000000 PLN. The insurance does not apply to the United States and Canada.

Available socket types: EU (Schuko), US (Nema 5-20R), AU (AS/NZS 3112)
Line voltage: 220-240 VAC 50/60 Hz lub 110-120 VAC 50/60 Hz
Maximum output power : 3 680 W
Maximum current load: 16 A
Absorbed impulse current: 13 000 A
Dimensions (L x W x H): 420 x 75 x 65 mm
Gross weight: 2,5 kg

전세계에서 가장큰 오디오쇼인 뮌헨오디오쇼에서 많은제조사가 GigaWatt사의 파워컨디셔너를 메인 전원장치로 사용을 해서 부스를 운영하고 있습니다



2017 년 뮌헨하이엔드오디오쇼에서 Gabel부스에서 사용되어진 PC4 Evo + DCB사진입니다..